• Cable Length: 1 ft cable
• Side Connectors: Male Thumbscrews
• Supports remote wake-up and power management
• Supports automatic handshake mode
• No IRQs, no IRQ conflicts
• Provides a 96 byte buffer for each upstream and downstream data transfer
• Compatible with USB Specification v1.1(0) & USB CDC v1.1, USB 2.0

• Ultra Light Aluminum Case provides heat dissipation.
  
  
• Supports Standard Notebook 2.5″ SATA Hard Drives and SSD Drives.
  
  
• 70% Faster than traditional USB 3.0, with UASP Transfer Protocol; The UASP Transfer
  
  Protocol only can accelerate read and write speed of SSD hard disk.
  
  
• Reverse compatible with USB 2.0 and 1.1.
  
  
• Hot-swappable, plug and play, no drivers needed.

• Single cable USB to serial communication
  
  
• USB full speed communication and bus-powered
  
  
• Supports automatic handshake mode
  
  
• Supports the RS-232 serial interface (standard 9-pin serial)
• 1-ft or 0.3m length
  
  
• Works with cellular phones, PDA, digital cameras, modems, and others
  
  
• Provides the connection between USB and the traditional RS-232 serial port
• Easy installation

The Sabrent CB-FTDI USB to Serial converter is the perfect solution for transferring data from a PDA or digital camera. The USB to DB9 provides a connection between an available USB port and the more traditional RS-232 serial port found on many devices.

• Cable Length: 6 ft Cable
• Side Connectors: Male Thumbscrews
• Supports remote wake-up and power management
• Supports automatic handshake mode
• No IRQs, no IRQ conflicts
• Provides a 96 byte buffer for each upstream and downstream data transfer
• Compatible with USB Specification v1.1(0) & USB CDC v1.1, USB 2.0

• This Sabrent AU-MMSA 2.1 Audio Sound Card Adapter is a highly flexible audio interface, which can be used with either laptop or desktop system. No driver required, plug-and-play for instant audio playing and compliant with all mainstream operation systems. Simply Plug the Sound Adapter into your USB port, and then plug your headphones into the Adapter.

Use Sabrent USB-DS12 to connect any 2.5" SSD / HDD or Desktop 3.5" Serial ATA/SATA or IDE/PATA Hard Drive externally to your computer through an available USB 3.0 or USB 2.0 port.

Supports up to 10TB drives

Use Sabrent USB-DSC9 to connect any 2.5" SSD / HDD or Desktop 3.5" Serial ATA/SATA or IDE/PATA Hard Drive externally to your computer through an available USB 3.0 or USB 2.0 port.

With Sabrent EC-SSHD connect a 2.5" SATA I/II/III hard drive or SSD to your computer with UASP Support, Speeds up to 5Gbps with 3.), Hot-swappable, plug and play, no drivers needed, reverse compatible with USB 2.0 & USB 3.0

The Sabrent EC-DFLT SATA Lay-Flat Docking Station supports the direct insertion of Desktop 2.5"/3.5" SATA Hard Drives. It is a caseless solution that makes swapping hard drives easier than ever before.

• Provides the connection between USB and the traditional RS-232 serial port
• Works with cellular phones, PDAs, digital cameras, modems, etc
• Supports the RS-232 serial interface (standard 9-pin serial)
• Supports automatic handshake mode
• USB full speed communication and bus powered
• Single cable USB to serial communication
• Easy installation

• Sabrent SBT-USC6K 2m Cable
  
  
• Side Connectors: Female nuts
  
  
• Supports remote wake-up and power management
  
  
• Supports automatic handshake mode
  
  
• No IRQs, no IRQ conflicts
  
  
• Provides a 96 byte buffer for each upstream and downstream data transfer
  
  
• Compatible with USB Specification v1.1(0) & USB CDC v1.1, USB 2.0

HB-MAC3 has sleek Apple-style design ideal For Mac Pro, iMac, MacBook Air, MacBook Pro, MacBook, and Mac mini.

This Sabrent HB-MACR hub is an external USB 3.0 combo which combines USB 3.0 hub with super speed card readers. The USB 3.0 Hub adds three USB ports to your Mac (or PC), allowing you to connect USB devices such as digital cameras, phones, external hard drives, flash drives, and printers to one convenient place. Its sleek aluminum design the perfect complement to your Apple computer and products.

You’ve got your Mac Mini, and now you want a safe, sturdy, and stylish way to display it. With Sabrent’s Mac Mini Mount, ensure your Mac Mini goes and stays exactly where you want it. Simple installation instructions and mounting screws/anchors included, you’ll be saving yourself valuable desk space in no time at all.

• Instantly Add Four USB 3.0 Ports to Any Compatible Device
  
  
• LED Indicators Display Power Status for Each Port
  
  
• Supports Transfer Speeds up to 5Gbps (USB 3.0), 480Mbps (USB 2.0), 12Mbps (USB 1.1)
  
  
• Reverse Compatible USB 2.0 and USB 1.1
  
  
• Easy Setup: No Installation; Plug & Play and Hot Swappable

The Sabrent HB-IMCU 4-port USB 3.0 Hub adds four additional USB ports to your iMac

The Sabrent HB-IMCR 3-Port USB 3.0 Hub with Multi-in-1 Card Reader For iMac Slim Unibody 2012 or later