Sabrent USB 3.1 (Type-A) to SSD / 2.5-Inch SATA Hard Drive Adapter [Optimized For SSD, Support UASP SATA III] (EC-SS31)

• Cable Length: 6 ft Cable
• Side Connectors: Male Thumbscrews
• Supports remote wake-up and power management
• Supports automatic handshake mode
• No IRQs, no IRQ conflicts
• Provides a 96 byte buffer for each upstream and downstream data transfer
• Compatible with USB Specification v1.1(0) & USB CDC v1.1, USB 2.0

• Single cable USB to serial communication
  
  
• USB full speed communication and bus-powered
  
  
• Supports automatic handshake mode
  
  
• Supports the RS-232 serial interface (standard 9-pin serial)
• 1-ft or 0.3m length
  
  
• Works with cellular phones, PDA, digital cameras, modems, and others
  
  
• Provides the connection between USB and the traditional RS-232 serial port
• Easy installation

With Sabrent EC-SSHD connect a 2.5" SATA I/II/III hard drive or SSD to your computer with UASP Support, Speeds up to 5Gbps with 3.), Hot-swappable, plug and play, no drivers needed, reverse compatible with USB 2.0 & USB 3.0

• Sabrent BK-PCBS 2.5” SSD & SATA Hard Drive to 3.5” SATA Bay Converter easily transforms SATA 3.5" bay drive to 2.5" SATA hard disk or SSDs, by simply converting your existing 3.5" drive bay to accommodate the smaller drives

• Ultra Light Aluminum Case provides heat dissipation.
  
  
• Supports Standard Notebook 2.5″ SATA Hard Drives and SSD Drives.
  
  
• 70% Faster than traditional USB 3.0, with UASP Transfer Protocol; The UASP Transfer
  
  Protocol only can accelerate read and write speed of SSD hard disk.
  
  
• Reverse compatible with USB 2.0 and 1.1.
  
  
• Hot-swappable, plug and play, no drivers needed.

• Sabrent EC-UASP Hard Drive Enclosure is a tool free design, easy to install suitable for 2.5” SATA/SSD. Supports 7mm/9.5mm thickness HDD, optimized for SSD, supports UASP SATA III, it's Plug & Play

The Sabrent CB-FTDI USB to Serial converter is the perfect solution for transferring data from a PDA or digital camera. The USB to DB9 provides a connection between an available USB port and the more traditional RS-232 serial port found on many devices.

• Sabrent SBT-USC6K 2m Cable
  
  
• Side Connectors: Female nuts
  
  
• Supports remote wake-up and power management
  
  
• Supports automatic handshake mode
  
  
• No IRQs, no IRQ conflicts
  
  
• Provides a 96 byte buffer for each upstream and downstream data transfer
  
  
• Compatible with USB Specification v1.1(0) & USB CDC v1.1, USB 2.0

• Ultra Light Aluminum Case provides heat dissipation.
  
  
• Supports Standard Notebook 2.5″ SATA Hard Drives and SSD Drives.
  
  
• 70% Faster than traditional USB 3.0, with UASP Transfer Protocol; The UASP Transfer
  
  Protocol only can accelerate read and write speed of SSD hard disk.
  
  
• Reverse compatible with USB 2.0 and 1.1.
  
  
• Hot-swappable, plug and play, no drivers needed.

• Cable Length: 1 ft cable
• Side Connectors: Male Thumbscrews
• Supports remote wake-up and power management
• Supports automatic handshake mode
• No IRQs, no IRQ conflicts
• Provides a 96 byte buffer for each upstream and downstream data transfer
• Compatible with USB Specification v1.1(0) & USB CDC v1.1, USB 2.0

The Sabrent AU-EMAC features a simple and compact Aluminum design. It has an easy access to instantly gain a microphone and headphone jack on your already existing USB audio class enabled system.

This Sabrent AU-EMCB is a 2.1 Audio Sound Card Adapter is a highly flexible audio interface, which can be used with either laptop or desktop system. Simply Plug the Sound Adapter into your USB port, and then plug your headphones into the Adapter.

• Instantly Add Four USB 3.0 Ports to Any Compatible Device
  
  
• LED Indicators Display Power Status for Each Port
  
  
• Supports Transfer Speeds up to 5Gbps (USB 3.0), 480Mbps (USB 2.0), 12Mbps (USB 1.1)
  
  
• Reverse Compatible USB 2.0 and USB 1.1
  
  
• Easy Setup: No Installation; Plug & Play and Hot Swappable

• Provides the connection between USB and the traditional RS-232 serial port
• Works with cellular phones, PDAs, digital cameras, modems, etc
• Supports the RS-232 serial interface (standard 9-pin serial)
• Supports automatic handshake mode
• USB full speed communication and bus powered
• Single cable USB to serial communication
• Easy installation

• Sabrent Apple TV Mount Compatible with the Apple TV 4 (BK-ATV4)

• Mount to TV via any VESA hole, to the wall, or adhere to a smooth surface
• Screws and 3M stickers included to accommodate mounting to a variety of surfaces
• Practical design safely supports Apple TV device while allowing access to available ports
• Compatible with Apple TV 4th Generation
• Saves space and protects your Apple TV 

• This Sabrent AU-MMSA 2.1 Audio Sound Card Adapter is a highly flexible audio interface, which can be used with either laptop or desktop system. No driver required, plug-and-play for instant audio playing and compliant with all mainstream operation systems. Simply Plug the Sound Adapter into your USB port, and then plug your headphones into the Adapter.

• Instantly Add Four USB 2.0 Ports to all Compatible Device
• Easy Setup, Plug-and-Play, Hot Swappable, Hot Pluggable
  
  
• Gain Four, Downstream Ports Which Offer High-Speed (480Mbps), Full-Speed (12Mbps), And Low-Speed (1.5Mbps)
  
  
• Intelligently Designed to Be as Thin as Possible, Allowing you to Maximize Precious Work Space or Travel with ease
  
  
• Backwards Compatible With 1.1 Devices and Hosts