Sabrent DS-2SSD USB 3.0 to SSD/2.5″ SATA Dual Bay Hard Drive Docking Station with Hard Drive Duplicator/Cloner [Support UASP]

$52.99
GST included
  • The Sabrent DS-2SSD supports all 2.5" (up to 9mm thick, 12mm without PSS case) SATA I, II, and III hard drives, solid state drives, and hybrid drives up to any capacity (6TB+).

  • Reverse compatible with USB 1.1 & USB 2.0.

  • plug and play, no drivers needed.
Quantity
There are not enough products in stock

PayPal
  • Security policy (edit with Customer reassurance module) Security policy (edit with Customer reassurance module)
  • Delivery policy (edit with Customer reassurance module) Delivery policy (edit with Customer reassurance module)
  • Return policy (edit with Customer reassurance module) Return policy (edit with Customer reassurance module)

DS-2SSD-Banner-1

The Sabrent DS-2SSD SATA Docking Station supports the direct insertion of Desktop two 2.5″ SATA Hard Drives or SSD. It is a caseless solution that makes swapping hard drives easier than ever before. Plus, now you can take advantage of the lightening speed of USB 3.0 to quickly transfer files up to 5 Gbps!Connect any 2.5″ Serial ATA (SATA) or SSD to your computer through an available USB 3.0 port on your desktop or laptop.

 

Hard Drive Duplicator Function

The Sabrent EC-2SSD Standalone Duplicator Dock can be used to duplicate/clone an existing hard drive without connecting to a computer, or simply as external storage to transfer data between a hard drive and your computer.

 

To use Hard Drive Duplicator Function:

  1. Insert both hard drives in the correct slot: Source Disk (HDD1) and Target Disk (HDD2).
  2. Move the switch to the UNLOCK icon to enable the cloning Function.
  3. Make sure that the USB cable is disconnected from any computer.
  4. Connect the Power Supply to the wall and switch on power.
  5. Press and hold the COPY for about 5-10 seconds until the 25% LED starts flashing.
  6. The cloning process will start.
  7. When the cloning process is complete, the unit will beep and LED will not flashing anymore.
  8. Move the switch to the LOCK icon when you are done using the Duplicator Function.

 

System requirements:

  • Available USB 3.0 for high speed data transfer
    Reverse compatible with USB 1.1 & USB 2.0.
  • Windows: 7/8/10 (Both 32-bit & 64-bit versions)
  • MAC: OS X

 

Package Contents:

  • Sabrent DS-2SSD Hard Drive Dock
  • Power Supply + AU Converter
  • USB 3.0 cable
  • User Manual
DS-2SSD