• Compatible with any 2.5” SATA hard drive or SSD
• Compatible with backplane trays such as those found in Apple Mac Pro silver tower models
• Fully SATA 3.0 Revision (6Gb/s) compatible and backward compatible with SATA 2.0 Revision (3Gb/s) and 1.0 Revision (1.5Gb/s) drives
• Open design allows for full air flow for proper drive cooling
• Solid aluminum frame design

• Ultra Light Aluminum Case provides heat dissipation.
  
  
• Supports Standard Notebook 2.5″ SATA Hard Drives and SSD Drives.
  
  
• 70% Faster than traditional USB 3.0, with UASP Transfer Protocol; The UASP Transfer
  
  Protocol only can accelerate read and write speed of SSD hard disk.
  
  
• Reverse compatible with USB 2.0 and 1.1.
  
  
• Hot-swappable, plug and play, no drivers needed.

• Supports Standard Notebook 2.5″ SATA Desktop Hard Drives.
• 
  Supports hard drives up to 750GB.
• 
  Ultra Light Aluminum Case provides heat dissipation.
• 
  LED light indicates Power and Activity status.
• 
  Hot-swappable, plug and play, no drivers needed.
• 
  Reverse compatible with USB 1.1.

• On/Off power switch.
  
  
• LED light indicates Power and Activity status.
  
  
• Hot-swappable, plug and play, no drivers needed
  
  
• Transfer Rates Up to 5 Gbps w/USB 3.0
  
  
• Transfer Rates Up to 480 Mbps w/USB 2.0

• The Sabrent DS-2SSD supports all 2.5" (up to 9mm thick, 12mm without PSS case) SATA I, II, and III hard drives, solid state drives, and hybrid drives up to any capacity (6TB+).
• 
  Reverse compatible with USB 1.1 & USB 2.0.
• 
  plug and play, no drivers needed.

The Sabrent EC-DFLT SATA Lay-Flat Docking Station supports the direct insertion of Desktop 2.5"/3.5" SATA Hard Drives. It is a caseless solution that makes swapping hard drives easier than ever before.

Sabrent USB 3.1 (Type-A) to SSD / 2.5-Inch SATA Hard Drive Adapter [Optimized For SSD, Support UASP SATA III] (EC-SS31)

• Ultra Light Aluminum Case provides heat dissipation.
  
  
• Supports Standard Notebook 2.5″ SATA Hard Drives and SSD Drives.
  
  
• 70% Faster than traditional USB 3.0, with UASP Transfer Protocol; The UASP Transfer
  
  Protocol only can accelerate read and write speed of SSD hard disk.
  
  
• Reverse compatible with USB 2.0 and 1.1.
  
  
• Hot-swappable, plug and play, no drivers needed.

Use Sabrent USB-DSC9 to connect any 2.5" SSD / HDD or Desktop 3.5" Serial ATA/SATA or IDE/PATA Hard Drive externally to your computer through an available USB 3.0 or USB 2.0 port.

• Sabrent EC-HDSS USB 3.1 Type C to SSD / 2.5" SATA Hard Drive Adapter [Optimized For SSD, Support UASP SATA III]

• Transfer Rates Up to 10 Gbps when connected to a Type-C USB 3.1 port.
  Type-C USB 3.1 provides data rate up to 10Gbps and is 2x faster than USB 3.0 (5Gbps).
  Hot-swappable, Tool-free HDD Installation, plug and play, no drivers needed.
  LED light indicates Power and Activity status.
  Plug & Play, Hot-Swappable, no drivers needed

• Sabrent EC-HDFN SATA Docking Station supports the direct insertion of Desktop two 2.5"/3.5" SATA Hard Drives. It is a caseless solution that makes swapping hard drives easier than ever before. Plus, now you can take advantage of the lightening speed of USB 3.0 to quickly transfer files up to 5 Gbps!
• Supports Standard Desktop 2.5"/3.5" SATA Hard Drives.
  
  
• Supports hard drives up to 8TB.
  
  
• plug and play, no drivers needed.
  
  
• Reverse compatible with USB 1.1 & USB 2.0.

With Sabrent EC-SSHD connect a 2.5" SATA I/II/III hard drive or SSD to your computer with UASP Support, Speeds up to 5Gbps with 3.), Hot-swappable, plug and play, no drivers needed, reverse compatible with USB 2.0 & USB 3.0

• Ultra Light Aluminum Case provides heat dissipation.
  
  
• Supports Standard Notebook 2.5″ SATA Hard Drives and SSD Drives.
  
  
• 70% Faster than traditional USB 3.0, with UASP Transfer Protocol; The UASP Transfer
  
  Protocol only can accelerate read and write speed of SSD hard disk.
  
  
• Reverse compatible with USB 2.0 and 1.1.
  
  
• Hot-swappable, plug and play, no drivers needed.

• Sabrent EC-UASP Hard Drive Enclosure is a tool free design, easy to install suitable for 2.5” SATA/SSD. Supports 7mm/9.5mm thickness HDD, optimized for SSD, supports UASP SATA III, it's Plug & Play