• High performance USB 3.0 extension cable extends the connection between a computer or Windows tablet and both USB 3.0 and USB 2.0 peripherals including hard drives, USB hubs, mice, keyboards, flash drives, printers, and more
• Upgrade to SuperSpeed USB 3.0 and future-proof your data transfer rate while maintain backwards compatibility with your existing USB 2.0 devices
• Enjoy SuperSpeed USB 3.0 data transfer rate at up to 5 Gbps, 10x faster than USB 2.0
• Features shielding that provides protection against noise from electromagnetic and radio-frequency signals, keeping your signal clear with less loss of bandwidth for higher performance

• Cable Length: 1 ft cable
• Side Connectors: Male Thumbscrews
• Supports remote wake-up and power management
• Supports automatic handshake mode
• No IRQs, no IRQ conflicts
• Provides a 96 byte buffer for each upstream and downstream data transfer
• Compatible with USB Specification v1.1(0) & USB CDC v1.1, USB 2.0

• Sabrent EC-HDFN SATA Docking Station supports the direct insertion of Desktop two 2.5"/3.5" SATA Hard Drives. It is a caseless solution that makes swapping hard drives easier than ever before. Plus, now you can take advantage of the lightening speed of USB 3.0 to quickly transfer files up to 5 Gbps!
• Supports Standard Desktop 2.5"/3.5" SATA Hard Drives.
  
  
• Supports hard drives up to 8TB.
  
  
• plug and play, no drivers needed.
  
  
• Reverse compatible with USB 1.1 & USB 2.0.

The Sabrent USB Type-C Dual HDMI Adapter DA-UCDH is the ideal device to add two HDMI monitors to your current workspace. The ability to increase one’s work-flow by utilizing multiple monitors or displays is undeniable, and the Type-C Adapter allows a person to do precisely that; make use of HDMI monitors to complete work faster, and more efficiently.

The Sabrent HB-IMCU 4-port USB 3.0 Hub adds four additional USB ports to your iMac

The Sabrent CB-FTDI USB to Serial converter is the perfect solution for transferring data from a PDA or digital camera. The USB to DB9 provides a connection between an available USB port and the more traditional RS-232 serial port found on many devices.

With Sabrent AX-TPCS Charge up to 10 USB devices simultaneously from one wall outlet.

• This Sabrent DA-MDHA adapter enables you to connect a Mini DisplayPort video output from your laptop, tablet, or desktop PC to HDMI-equipped displays, HDTVs, and projectors
• 
  Supports resolutions up to 3840x2160 (4K) Ultra-HD@30Hz, 1080P@120Hz. Supports 8-channel LPCM and HBR audio up to 192kHz sample rate
• 
  Ideal accessory for Apple iMac, Mac Mini, Mac Pro, MacBook Air, MacBook Pro 13 inch, MacBook Pro 15 inch, MacBook Pro 17 inch and more compatible models are listed in the PD.

This Sabrent HB-MACR hub is an external USB 3.0 combo which combines USB 3.0 hub with super speed card readers. The USB 3.0 Hub adds three USB ports to your Mac (or PC), allowing you to connect USB devices such as digital cameras, phones, external hard drives, flash drives, and printers to one convenient place. Its sleek aluminum design the perfect complement to your Apple computer and products.

• Supports Standard Notebook 2.5″ SATA Desktop Hard Drives.
• 
  Supports hard drives up to 750GB.
• 
  Ultra Light Aluminum Case provides heat dissipation.
• 
  LED light indicates Power and Activity status.
• 
  Hot-swappable, plug and play, no drivers needed.
• 
  Reverse compatible with USB 1.1.

The Sabrent HB-SIMC Multi-Port USB Type-C Hub (iMac 2017 and Later) adds Front access to additional USB 3.1 Type-C & USB 3.1 Type-A ports, Independent SD and micro-SD UHS-II card readers, 3.5mm headphone connector to your iMac allowing you to connect USB devices such as digital cameras, phones, external hard drives, flash drives, and printers as well as card readers and headphones to one convenient place

• Ultra Light Aluminum Case provides heat dissipation.
  
  
• Supports Standard Notebook 2.5″ SATA Hard Drives and SSD Drives.
  
  
• 70% Faster than traditional USB 3.0, with UASP Transfer Protocol; The UASP Transfer
  
  Protocol only can accelerate read and write speed of SSD hard disk.
  
  
• Reverse compatible with USB 2.0 and 1.1.
  
  
• Hot-swappable, plug and play, no drivers needed.

• Sends print jobs to parallel printers through USB port
  
  
• Fully compliant with USB 1.1/2.0 and IEEE 1284 specifications
  
  
• Bi-directional data transfer over parallel port for high speed printing up to 12Mbps data transfer rate
  
  
• Low power consumption, no external power adapter needed
• Supports most printers
  
  
• Plug & Play for effortless installation

• Add Apple AirPlay support to any speaker system - including your car, boat, home stereo/receiver or old iPhone/iPod dock. Wirelessly stream music from your iOS device or iTunes
• Better than Bluetooth - AirPlay is lossless (no audio compression), has better range, no pairing limitations and supports multi-users; anyone can play DJ. Will work seamlessly with your existing Bluetooth hands-free setup (music will pause for incoming/outgoing calls and resume when call ends).
• Plug and Play - No configuration or computer needed. Setup AirPlay in your car in less than 3 minutes!

The Sabrent AU-EMAC features a simple and compact Aluminum design. It has an easy access to instantly gain a microphone and headphone jack on your already existing USB audio class enabled system.

• Cable Length: 32' (10m)
• 
  External power not required
• 
  USB 2.0 A-male to A-female extension cable connectors
• 
  16' USB extension cable supports USB 2.0 data transfer speeds up to 480Mbps
• 
  Plug-and-Play connectivity
• 
  Works with all USB devices
• 
  No drivers needed

Use Sabrent USB-DS12 to connect any 2.5" SSD / HDD or Desktop 3.5" Serial ATA/SATA or IDE/PATA Hard Drive externally to your computer through an available USB 3.0 or USB 2.0 port.

Supports up to 10TB drives